Product Group: | Refrigeration units using ir32 |
---|---|
Content: | Carel ir32 Replacement Guide - Replacement kit availability for ir32 controllers |
Issue Date: | 16/0/2012 |
Bulletin No: | SBG0062 |
---|---|
Revision: | 1.0 (Current version of this bulletin) |
The Carel ir32 controller became obsolete in late 2011. In the event of a failure of the ir32 controller or display, there are now two retrofit kits used to replace the ir32 controller with the new ir33 controller. The kit to use depends on the model of cabinet.
The replacement kit used is the ELZ10464-KIT-SP2 or ELZ10464-KIT-SP3. This kit replaces all ir32 DIN rail mounted controllers and includes the temperature display. The old part numbers replaced are
as follows:
The retrofit kit consists of a new ir33 DIN rail mounted controller, a temperature display module, a cable for this module and some associated wiring.
These controllers are found in a variety of freezer and older model refrigerators, including the following:
The ELZ10464-KIT-SP2 covers the following models:
The ELZ10464-KIT-SP3 covers the following models:
We use cookies to improve your browsing experience, provide personalised content, and analyze site traffic. By using our site, you acknowledge that you have read and understood our use of cookies. Choose to accept or decline our use of cookies by clicking the buttons below. If you decline, we will not use cookies on our site. However, some features may not be available to you.